|
Tractor Talk Discussion Board |
Re: Spin on oil filter
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Rod F. on August 01, 2005 at 09:16:33 from (142.177.109.168):
In Reply to: Spin on oil filter posted by George in Biloxi on August 01, 2005 at 08:59:30:
Hi George, I think, but I'm not going to swear on this, but the oil filter should be a PH8A Fram, or it's equivelant. The same one used on the Ford Windsor engines. NH was actually sourcing the filters from FleetGuard, so your nearest FG dealer, or Cummins dealer should be able to supply exactly the same filter. The Wix number will also be a 51515. Baldwin can also supply them, although I'm not sure about the number. They should be able to cross it for you.
Likewise, the fuel filter is a very common filter. The same filter would have been prominent on several Massey's, possibly David Brown, or many Perkins powered engines. The filter is about as common as dirt. Found most places for less than 10 bucks. Again, FG can supply these filters, as I'm sure Baldwin can too.
I'm not sure about the power steering filter. I've always bought them from NH, and never looked for another source. Best of luck. Rod
Follow Ups:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
