Tractor Talk Discussion Board |
Re: Any clover farmers out there????
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by B. Butler on September 08, 2005 at 12:47:52 from (199.197.135.1):
In Reply to: Any clover farmers out there???? posted by diggerdave on September 08, 2005 at 10:53:02:
A lot of the guys doing food plots for deer are overseeding with clovers in old fields, log roads, inaccessible spots in openings in woodlots using ATVs or by hand with minimal/no tillage. Clover does pretty well in low fertility and low PH soils so it's a good choice. Of course adding lime in the fall where soil tests dictate and a little fertilizer in the spring will help give the seedlings a real boost.From what I read and from the fellows that I have talked to the key is killing off the weed/grass competition the year prior to frost seeding in late winter/early spring. Experts recommend an herbicide (roundup or generic)application at least two or three times during the year with the last spraying in September. Some say close grazing by livestock or very short mowing in the fall will do ok sometimes. The key is to reduce competition so the new clover plants don't get shaded out by the competing new spring growth. The dead grass and weeds from herbicide application actually act as a mulch in the spring to hold moisture and protect the new seedlings from wind and sun. I've frost seeded clover and other grasses in the past with limited success because I didn't kill off the competition. For your application using several kinds of clover as a ground cover frost seeded into previously sprayed ground might just work pretty well for you. Good luck. This is just what I'm doing on my farm and on some hunting ground my buddy owns.
Follow Ups:
Home
| Forums
Today's Featured Article -
Oil Bath Air Filters - by Chris Pratt. Some of us grew up thinking that an air filter was a paper thing that allowed air to pass while trapping dirt particles of a particles of a certain size. What a surprise to open up your first old tractor's air filter case and find a can that appears to be filled with the scrap metal swept from around a machine shop metal lathe. To top that off, you have a cup with oil in it ("why would you want to lubricate your carburetor?"). On closer examination (and some reading in a AC D-14 service manual), I found out that this is a pretty ingenious method of cleaning the air in the tractor's intake tract.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|