Tractor Talk Discussion Board |
Re: Fire Ants
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by NC Wayne on September 29, 2005 at 19:22:40 from (205.188.117.6):
In Reply to: Fire Ants posted by Yancey on September 29, 2005 at 18:44:18:
We had a bad outbreak of them around my place a few years ago. After my roomates son got into a mound and got stung over 100 times I went on a rampage against them. I know I didn't get every mound but I went over my 4.5 acres, the neighbors field across the street which is about 5 acres, as well as up and down the sides of the road a ways in both directions from my place and sprayed every mound I could find with Diazanon. I'd start in a circle about 4 feet out from the nest and spray everything, working in to the center and then soak the mound, usually using the force of the spray to punch a hole down into the mound. I know for a fact that when I sprayed them the nests died off completely. There was one that was as mounded up as big as a 5 gallon bucket that I sprayed. The day after I sprayed it I went back with a shovel and have yet to see anything living in it. That first year I can't even begin to count the number of mounds I sprayed. In the couple of years since either the majority of them have gotten way better at hiding their digs or finally decided their fighting a natural enemy they can't beat because I haven't found but two small nests since...and I sprayed the he-- out of them too....Unfortunately Diazanon worked so their not making it anymore, probably not enviromentaly friendly since it actually killed the pests you sprayed it on. Instead their making Triazanon or something like that and I don't know how if it works or not. if you can get hold of the old origional Diazanon though I guarantee you it'll work.
Follow Ups:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|