Re: Hydraulics on a TO 35

Posted by BobinKY on October 04, 2005 at 08:28:50 from (152.163.101.7):

In Reply to: Re: Hydraulics on a TO 35 posted by MSM on October 04, 2005 at 07:43:02:

I have an Allis Chalmers WD that is set up the same way. It is not a problem. When I am pulling my bush hog that uses a remote cylinder on the mower, the arms will raise before the cylinder is actuated. This is not a problem. That hook-up comes in handy when I am pulling my hydraulic disk or other impliments. Which side of the pump should the line come out of? Currently I have a line coming out of both sides of the pump. I only need one line so which one will I keep? In the parts manual they show a bracket for mounting a dual hook-up on the tractor, but it does not show where it goes or where the lines connect. The Owner's manual is basically useless. Thanks.

Follow Ups:

• Re: Hydraulics on a TO 35 Bill WI 19:50:59 10/04/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]