Re: Skidloader mounting plate on tractor loader?

Posted by PaMike on October 06, 2005 at 09:20:00 from (24.152.213.144):

In Reply to: Skidloader mounting plate on tractor loader? posted by K.B.-826 on October 05, 2005 at 20:27:39:

I did just what you are talking about on my 1755 Oliver(85hp). Call around to equipment dealers and any salvage yard and buy the entire setup off a skidloader. I got mine for $75 from the IH dealer. $75 dollars is a steal. It was a used take off that was too worn for a contractor. Once the latches wear some they will pop open then they use the hydraulic jackhammer. I dont use a jackhammer so it works great. Once I got the piece is was just a matter of fabricating it up to my wider loader arms. It took some work, but I did it. You can buy the skidloader plate new, but they are around $800.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]