Re: boat work

Posted by formerly mike brown on October 28, 2005 at 05:13:46 from (132.236.155.41):

In Reply to: Re: boat work posted by Kevin (FL) on October 27, 2005 at 19:08:26:

If your fiberglass boat has boat pox ie. blistering, then
you have to open the blisters by sanding and let the
boat get good and dry before you try to repair and paint.
Blisters are caused by water migration into the
fiberglass due to salts left in the resin to which the water
is attracted. then fallow the above advice. Always use
primer for best results.
Good marine paint is expensive but worth it.

Follow Ups:

• Re: boat work Eric Rylander 16:43:29 10/28/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]