Re: Farmall A

Posted by William Hatcher on November 16, 2005 at 09:47:44 from (65.30.170.58):

In Reply to: Re: Farmall A posted by bud sather on November 16, 2005 at 08:58:33:

The rear are mounted the same. However, as you know, the right rear wheel weighs about 200 lbs more than the right and thus about an inch thicker. But not enough to account for the 4 inch difference in tracking.

The right front cannot be moved in any farther because the axle in in the sleeve as far as it can go. The left front can be moved out to track the outside of the left rear. This leaves the front end asemetric.

I'm wondering if there is an engineering reason for the tracking difference?

Follow Ups:

• Re: Farmall A RN 14:32:46 11/16/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]