Tractor Talk Discussion Board |
Re: Which liquid soap for installing wet sleeves
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by NC Wayne on November 29, 2005 at 19:33:44 from (152.163.101.7):
In Reply to: Which liquid soap for installing wet sleeves posted by Willy p on November 29, 2005 at 18:45:42:
Not gonna say it won't work without causing problems because obviously it's been tried, but personally I'd steer away from using any kind of oil, be it cooking oil or whatever. I say this because oil and water don't mix together very well, even in small quantities. Since the cooling system doesn't get hot enough to "burn" the oil off this could cause two things to happen seperately or together. One the oil will create a film on the metal surfaces which will cause a decrease in the heat transferrence, and that's the last thing you want to happen around a liner. Two the oil and water could mix/emulsify causing a pocket of sludge which will also create a hot spot with a low heat transfer.---With dish soap it's designed to disolve in the water. By the time you fill the coolant system the first time with plain water and run it long enough to leak test it the soap and water will have mixed. This gives an added bonus because the soap is designed to cut oil and hold onto it. This means any oil that may have gotten into the system at the machine shop, during building, or whatever, will be flushed out when you drain everything. This way your assured that when you fill the system with clean water and antifreeze you've got a system that's pretty much as clean as you can get.---With that said I've been building engines for years and have never really given thought to which brand, specifically, worked better. If I need a bottle I tend to buy the whatever is on sale, and have never had an engine come back. I believe what's on the shelf presently is what's left of a bottle of JOY that's about a year old. Good luck with the rebuild.
Replies:
Home
| Forums
Today's Featured Article -
Grain Threshing in the Early 40's - by Jerry D. Coleman. How many of you can sit there and say that you have plowed with a mule? Well I would say not many, but maybe a few. This story is about the day my Grandfather Brown (true name) decided along with my parents to purchase a new Ford tractor. It wasn't really new except to us. The year was about 1967 and my father found a good used Ford 601 tractor to use on the farm instead of "Bob", our old mule. Now my grandfather had had this mule since the mid 40's and he was getting some age on him. S
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|