Re: Need some ideas on how to hook up an alternato

Posted by jdemaris on December 22, 2005 at 20:10:42 from (66.218.22.24):

In Reply to: Re: Need some ideas on how to hook up an alternato posted by old on December 22, 2005 at 18:10:08:

If you find a way to do it using an existing oil-pressure sender, repost - I'd like to hear about it. I don't see how it can work. Most OEM oil senders send a ground signal back to the gauge, not a positive 12 volts. But, yes you can buy two-pole switches and use them for swithing current off and on by oil pressure - but, as you described, you wanted to know how to do this WITHOUT adding any switches - and an oil pressure switch is a switch.
You can buy a oil-pressure switch that is normally open, but closes when oil pressure exceeds 2-6 PSI and has 1/8 X 27 threads - NAPA part # OP6118

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]