Re: getting a ball hitch to fit on a three point t

Posted by Ken in Mich on December 23, 2005 at 08:43:44 from (207.89.155.82):

In Reply to: Re: getting a ball hitch to fit on a three point t posted by Tim...Ok on December 22, 2005 at 08:08:05:

I'll add mine... This is real simple to build, two pieices of angle iron, and one piece of square tube. I drilled a hole in the tube for the ball hitch so I could change out for a differnt size if I wanted to. The pins on the end are from Tractor Supply, about $1.50 each. Here is a pic off:

Replies:

• Re: getting a ball hitch to fit on a three point t Ken in Mich 08:45:20 12/23/05 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]