Tractor Talk Discussion Board |
maybe a utility body
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by thejdman01 on January 11, 2006 at 06:28:35 from (152.163.101.7):
In Reply to: Re: Trucking Song? posted by Rauville on January 11, 2006 at 05:21:52:
If you have a trailer readily available I would personally throw a service body on it. Around here a lot are used by the electric company so they are nice fiberglass bodies that wont rust. Can be found around here cheap enough from utlility companies as all they run are those international trucks. Then you can put all your tools on that and have a welder and tools available if you do any tractor pulling or just have a good service trukc around the farm. The reason I say if you have a trailer available you miight want the pickup bed for hauling and moving items but if you got a trailer just use that. Might be a slight pain dragging that around but not too bad. Then you can buy all sorts of toys gen/welder, air compressor. CHECK THE PARKING BRAKE. I cant tell from your pic what model or year the truck is but some of those old internationals (and alot of old gm topkicks) had r n d 3 2 1 gear shifter and the parking brake on the floor on a handle. The parking brake was then just a little pad on the driveshaft. Have seen many of those trucks run by inexperienced drivers that the parking break got left on. Also those parking brakes are not the best and have seen 2 instances of guys loading tractors and 1 a guy loading a backhoe behind the ttruck and got pretty jerky w/them and the trucks went by by. Just somethign to watch for. If the truck has air brakes disregard. But alot had the parking brake on the drive shaft.
Replies:
Home
| Forums
Today's Featured Article -
Trenching With a Plow - by Staff. Introduction: This interesting information came from one of the discussion forums here at YT. We thought we should place it up front so it could be read by anyone interested in putting old iron to work. [Editor] I tried something new today, and it worked so well I thought I should post it - in case it might help someone else. I'm running 100 yards of 4" drain pipe from the gutter downspouts of our house to a pond down the hill. This should hel
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|