Tractor Talk Discussion Board |
Re: white 2-75 tractor
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by ChrisLSD on March 23, 2006 at 08:21:02 from (71.33.91.87):
In Reply to: white 2-75 tractor posted by rboulware on March 23, 2006 at 07:01:07:
I have one - I like it a lot - of course I have to get it out of the repair shop this weekend..... the good - it has a lot of gears and can go real slow - both forward and reverse it has differential lock and mine also is MFWD - a great loader tractor glow plugs make it start real good - plug it in for a couple hours and it starts like summer - pretty good fuel economy (i think anyway) - the PTO has a reverse - when the round baler plugs I can put the PTO in reverse and just back up a ways and clear the plug..... mine even has an option of an extra set of hydraulic remotes - so I have triple hydraulics - can run an implement and not disconnect anything on the loader the bad - parts are expensive (what aren't) - but i have gotten everything at my local agco dealer - i found i can get oil filters much cheaper at a local auto parts store - that is really all i have bought for mine - in 6 years or so of owning it - for light duty loader stuff, snow removal, and tiny amount of haying and spraying in summer.... top speed is about 14 mph - not a road racer.. mine had a bizarre PTO problem - it would quit just out of the blue after using it al lday then u couldn't use it again until the whole tractor cooled off - they had to split it to fix it- a couple of steel retaining seals were shot and broke - that was it - had them put a clutch in at the same time - mine has 4600 hours right now - i think mine is a '88
comments - the isuzu diese li have heard from several is good - a lot of delivery vehicles like UPS vans and bread trucks use them...also now a lot of irrigation engines have started using them 

Replies:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|