Re: Pulling a 21 ft disc

Posted by Glen in TX on March 23, 2006 at 13:16:28 from (208.246.9.90):

In Reply to: Pulling a 21 ft disc posted by Patrick_76 on March 23, 2006 at 12:46:22:

Yes, the 4620 or 5020 should pull it as they are in the 130-140 HP range. For heavy work with it you will want 130 HP + or -. Use to pull a 20 ft. single offset for very light work with 120 HP 4320 but not for heavy work and then used 140 HP 4450 or 175 HP 6030 but a single offset pulls harder than the double offset too. Could always take the wings off. 12-14' is plenty for 100 HP.

Replies:

• Re: Pulling a 21 ft disc KRUSS 06:30:49 03/24/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]