|
Tractor Talk Discussion Board |
Re: Ford 3000
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by Karl Olmstead on June 28, 1999 at 11:28:56 from (208.138.142.216):
In Reply to: Ford 3000 posted by C. M. on June 28, 1999 at 06:25:06:
Hydraulic pressure is available under that flat plate that bolts to the top front of the big cover to which the cylinder is mounted. You can figure out where the pressure is by turning over the motor with that plate removed. Drill and tap a hole, or drill a hole and weld a pipe fitting to the plate. That gives you pressure. You can dump the return back into the same area, or into the access port on the left side of the transaxle. I can send digital photos if you'd like. My 3-pt. is fed thru that top plate instead of via the factory manifold.
Follow Ups:
Post a Followup
|
