|
Tractor Talk Discussion Board |
Re: CASE VC
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Mike in UP of MI on March 26, 2006 at 19:23:36 from (66.84.189.221):
In Reply to: Re: CASE VC posted by D.Bower on March 26, 2006 at 18:55:21:
I'm located in Menominee. I have two VC's, a 1940 and a 1941. The 41 needs a new ring gear, starter drive and brakes. The 40 needs the foot throttle assembly and the correct rear tires. Also the right side brake is siezed up. The tires that are on the 40 are too wide and the one rim is rusted through. I am still trying to decide if i'm going to restore the 40 or use it as a parts tractor. I'm not familiar with the VAC, so i'm not sure what parts are the same on the VAC. From what I have heard, not many of the parts are the same.
Replies:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
