Tractor Talk Discussion Board |
Re: Air in loaded tires??
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by RodInNS on March 29, 2006 at 07:09:37 from (142.177.84.149):
In Reply to: Air in loaded tires?? posted by SJ on March 28, 2006 at 16:38:41:
Add air when the stem is at the top. Get a spring return pressure gauge that spits the fluid out when you're done with it. They do last for several years, which is better than a few days for the regular type gauge. And it certainly never hurts to have a spare valve core close at hand. They do corrode, and from time to time need replacing. As far a pressure goes..... that depends on the load you're carrying. If you look in your operators manual there may be a chart showing the correct inflation pressure for a given tire/load combination. If not, a tire shop ought to have one. Understandably, as you put more weight on the tractor, more weight is transfered to the tires, and the tires require more air to carry that load without flexing. I don't know the correct inflation for your tractor, but on most of my tractors, with bias drive tires, I'm running 15-20 psi. Again, this depends on what you're carrying. HTH. Rod
Replies:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|