Tractor Talk Discussion Board |
Re: The Deal with Diesel vs. Gas
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by jdemaris on February 22, 2006 at 12:28:39 from (69.67.234.131):
In Reply to: Re: The Deal with Diesel vs. Gas posted by rboulware on February 22, 2006 at 12:00:10:
Things are sometimes equal, sometimes not. Some tractors use a fairly light duty gas engine as compared to a heavier diesel, whereas with others, the gas engine is almost identical to its diesel counterpart, e.g same number of main bearings, same crank journal sizes, same cubic inch displacement, etc. Cletrac/Oliver, Ford, Allis Chalmer, etc. often used the same engine blocks for gas or diesel versions. Deere usually did not. All depends on who made it and when. Diesels tend to have considerably less horsepower per cubic inch than gas engines, so with many makes, the gas engine will be smaller than its diesel counterpart for the same tractor - to keep the horsepower ratings equal. In regard to the Ford 8N an 9N tractors, the engines are adaptations from Ford Model A car engines. With expenses - diesel fuel weighs more than gasoline, i.e. it has more engergy value per pound or gallon. Also, if you have a diesel tractor you can easily get fuel with no highway tax on it. Several downsides include the extra batteries and heavier starters needed, cold weather starting issues, and the high price of diesel injection parts. Take a pickup truck for example. With a gas engine, you might want to change the spark plugs once or twice every 100,000 miles (or an old truck every 20,000 miles). A diesel truck with IDI pintle injectors, they ought to be changed every 100,000 miles. The injectors can cost $25-$100 apiece - that's a bit more costly than spark plugs. I just bought brand new injectors (not rebuilt) for my 87 Chevy diesel at $22 each, and for my 94 Ford turbo-diesel at $37 each. I just got done rebuilding the fuel injectors in my Allis Chalmers HD4 bulldozer, and including new tips, it cost me $200 to do four injectors.
Replies:
Home
| Forums
Today's Featured Article -
Timing Your Magneto Ignition Tractor - by Chris Pratt. If you have done major engine work or restored your tractor, chances are you removed the magneto and spark plug wires and eventually reached the point where you had to put it all back together and make it run. On our first cosmetic restoration, not having a manual, we carefully marked the wires, taped the magneto in the position it came off, and were careful not to turn the engine over while we had these components off. We thought we could get by with this since the engine ran perfectly and would not need any internal work. After the cleanup and painting was done, we began reassembly and finally came to t
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|