Tractor Talk Discussion Board |
Re: Dads 1/2 scale D John Deere.
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Chances R on February 23, 2006 at 16:42:41 from (205.188.117.14):
In Reply to: Dads 1/2 scale D John Deere. posted by Chances R on February 22, 2006 at 15:22:32:
This is from my Dad. The specs on building the 1/2 D are something like this. The engine is a 3 1/2 Briggs with a old style carb due to hood clearence. The Briggs is shaft driven into a Hydro from a 316 J D lawn tractor. The pump in the Hydro was reversed due to the reversed rotation of its input shaft. The clutch lever controls the Hydro by way of special spring loaded linkage. The driver has to keep the hand on the clutch lever to maintain motion. For safety the flywheel and the belt pulley do not turn. The rear wheels are from a 1984 Mercury and the hubcaps were made to look like the rear cast centers on the GOLD D, The fake engine block is a 6 inch pipe split front to rear and a 4 inch flat bar added. The new grill screen was made by Raleigh Oliver at IPCO MACHINE. The hood was made by DAVE GEYER. The paint is Dupont Acrylic enamel, 1998 G M code 63. I put one quart of paint on the tractor, one quart on me and one quart on the floor after the dust settled. At one time there were 88 items that I had sandblasted, primed and painted gold while hanging in my shop, sorry I did not take any photos during the building of this project. It took 625 hours to restore the real D and i guess as many hours in ithe little D. As of now it is to go the the big Farm Toy at Branderburg, KY March 3 & 4 2006. Enjoy, I have while building this model.
Replies:
Home
| Forums
Today's Featured Article -
Timing Your Magneto Ignition Tractor - by Chris Pratt. If you have done major engine work or restored your tractor, chances are you removed the magneto and spark plug wires and eventually reached the point where you had to put it all back together and make it run. On our first cosmetic restoration, not having a manual, we carefully marked the wires, taped the magneto in the position it came off, and were careful not to turn the engine over while we had these components off. We thought we could get by with this since the engine ran perfectly and would not need any internal work. After the cleanup and painting was done, we began reassembly and finally came to t
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|