Tractor Talk Discussion Board |
Re: LP Tractors - Pros and Cons
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by wilman on February 24, 2006 at 06:58:42 from (66.43.235.145):
In Reply to: LP Tractors - Pros and Cons posted by B. Abseck on February 24, 2006 at 01:28:39:
Let's see gas at 2.16 here in NE Iowa, off road diesel at 2.10 and LP at 1.35, makes it pretty economical when I go to fill my D17 LP. Fuel handling is a little different than using a gas or diesel tractor and takes different equipment but any type of competent LP salesman should be able to get you set up filling it either from your big LP tank for house or shop heating or from smaller tanks. May also cost a little more for the equipment to fill it but is worth it in the long run when you look at the price differences. I use an older 33# fork lift cylinder that doesn't have a tube in it. It holds about 7 1/2 gallon of LP and yes it is a little heavier than a 10 gallon can of gas (I don't have a fuel barrel at the farm) but I don't have to heft it up to dump it in either. Let it sit on the ground, hook the hose up, crack the bleeder valves and fill valves and let it fill. Takes a little longer than using a gas can but gives me time to do other projects. As far as cold starting, my LP burner started right up at 5 degrees this winter to move snow and was sitting in an unheated machine shed and wasn't plugged in. Mine has a electric primer button that I push for a couple of seconds to prime everything and then turn the key and start it. I also have no problem shutting it off, turn the key off and she shuts down. Don't even have to turn the valves off. Biggest con maybe when it comes time to work on the carb or regulators as they can become expensive and maybe harder to find parts for but I will cross that bridge when I get to it. If you can't tell, I really like that LP tractor. Wil
Replies:
Home
| Forums
Today's Featured Article -
A Belt Pulley? Really Doing Something? - by Chris Pratt. Belt Pulleys! Most of us conjure up a picture of a massive thresher with a wide belt lazily arching to a tractor 35 feet away throwing a cloud of dust, straw and grain, and while nostalgic, not too practical a method of using our tractors. While this may have been the bread and butter of the belt work in the past (since this is what made the money on many farms), the smaller tasks may have been and still can be its real claim to fame. The thresher would bring in the harvest (and income) once a y
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|