Re: Farmall M belt driven equipment

Posted by Ed Kratt on February 28, 2006 at 04:05:07 from (69.40.142.105):

In Reply to: Farmall M belt driven equipment posted by Ed Kratt on February 27, 2006 at 12:25:37:

Thanks for the replies to my question. I have played with it long enough now that I can get it to work. It is extremely important to have the alignment perfect and also that nothing moves when it is running. The cornsheller was mounted on skids and as it ran it would jiggle to one side or the other very slightly, I finally weighted it down with a 200 lb anvil. Thanks again....

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]