Re: rear blade.

Posted by MarkB_MI on April 11, 2006 at 03:29:13 from (64.31.11.207):

In Reply to: rear blade. posted by Tim Shultz on April 10, 2006 at 18:47:43:

I think you'll find a box scraper will work much better for land leveling. Even if you can get your blade to cut, it's difficult to get a smooth finish with a back blade. Most box scrapers have ripper teeth that you can lower to bust up the dirt.

Also, you can probably get your blade to work better if you play around with the angles. Pivot the blade to 45 degrees, and adjust the top link so that the corner of the blade is digging into the ground.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]