Tractor Talk Discussion Board |
Re: brake bleeder screws international 584
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Michael G Burns on April 24, 2006 at 18:02:52 from (72.228.23.150):
In Reply to: Re: brake bleeder screws international 584 posted by CEB on April 24, 2006 at 10:21:38:
Thanks for the word on the idiot light: It works---sometimes. It appears that there's a bad ground down near the parking brake lever, and depending on which way you wiggle it it works or it doesn't. Same problem affects the fuel gage; I haven't found out why the tach doesn't work yet. Let me tell you, I'm looking ahead at many a happy hour with this old heap! Finding enough time to work on it is complicated because I'm using it to help renovate a derelict farm that's about an hour away from where I live and work---but it's all worth it, 'cause in the end I'm getting out of town and back where I belong! thanks for all the help.
Replies:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|