|
Tractor Talk Discussion Board |
Coolant turns to semi-solid ?
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Way Up Here on May 18, 2006 at 06:41:03 from (64.42.242.26):
This story happened in a classic car, not a tractor, but it is an interesting tale so I thought I'd pass it on. Back in the 80's, a local guy here was restoring a classic Cord automobile. The engine was completely rebuilt and reinstalled in the car and then other work was done on it. He became sick during this time and didn't do anything to the car for a number of years, and then in the early 90's he passed away and the car sat until about 2000 when it was sold by the fellow's wife. It made it's way back east and the restoration continued along with upholstery, wiring, and all the other things that needed doing to complete the restoration. When they were about to get the car started this spring, the coolant level was checked and unfortunately it had turned almost solid, a rubbery semi-solid gell so the story goes. Whether it is just in the radiator (as was seen) or throughout the engine isn't yet known but obviously, somebody did something wrong. What might have caused this?
Replies:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
