Re: Grease zirk problem

Posted by Hurst on May 24, 2006 at 18:22:36 from (66.129.5.5):

In Reply to: Grease zirk problem posted by old on May 24, 2006 at 15:31:39:

The only thing I have ever done that seems to work on about 95% of the tips I have (if it doesnt work, they are replaced as there is more than grease clogging them) is to put them in the vice, and light up your blow torch (propane torch) and heat her up. Be careful, as they will pop and can shoot some nasty spirts of hot flaming grease out at you. Stand back and don't do it near a baler or dry grass... Afterwards, put a little penitrating oil in it to loosen up anything left and you should be good to go. Some do just seem to clog up for no reason at all though??? go firgure Good luck

Hurst

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]