Re: Oliver 60 RC Loose Steering

Posted by RustyFarmall on June 21, 2006 at 07:04:03 from (207.32.13.238):

In Reply to: Re: Oliver 60 RC Loose Steering posted by Kurt Smith on June 21, 2006 at 06:32:21:

I don't know if the shafts are the same size or not, but the Farmall H originally used a U-joint that was welded to the shaft. There is a replacement joint that allows you to cut the original joint off of the shaft, and then the new one slips over the shaft. You need to drill a hole for a roll pin, and you are good to go. You might check with some farm machinery dealers in your area, I believe these replacement joints are available in different sizes.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]