Re: primer and bondo use

Posted by Angle Iron on June 22, 2006 at 18:36:12 from (64.136.26.226):

In Reply to: primer and bondo use posted by amo on June 22, 2006 at 18:16:33:

I use laquire(sp) thinner to clean the bondo spreaders. Just put a little in a shallow pan and let set a while if it has already hardened or just use a rag and some thinner if it is still soft. Be sure to cover the pan with foil or somthing it will catch fire faster than gas. A good pair of chemical resistant gloves is a good idea as the thinner can dry your hands very quickly as well as getting into your system. Don't know about the primer except that I like to use two colors so I know when I'm about to sand through to bare metal. Then I can shoot another coat of build up if need be and still have a good base of primer.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]