Re: J.D. 4010 steering problem.

Posted by Glen in TX on June 25, 2006 at 14:10:45 from (208.246.9.118):

In Reply to: Re: J.D. 4010 steering problem. posted by gordon smith on June 25, 2006 at 13:29:58:

You'll have to drain the oil when trying to clean or inspect that primary pump screen in trans and then can see condition of oil too. Was it full of oil? If oil is milky or got water in it you're going to have problems too. If the steering or brakes go away or work hard when you use remotes or rockshaft something may be wrong with that PCV pressure control valve. It does sound like a oil supply or oil problem when everything has problems working. You can view the parts catalog (at left click on parts catalog and enter 4010) at JD parts online to get a better idea of what is in there if you haven't seen that yet.

• JD Parts Site

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]