Re: Ok boys put on your thinking caps on for this

Posted by Gerald J. on June 29, 2006 at 10:59:56 from (67.0.102.201):

In Reply to: Ok boys put on your thinking caps on for this one posted by old on June 29, 2006 at 10:23:18:

Or go to www.mcmaster.com and pick up pieces of oi hardening ground tool steel in 1/32" x 1/2". Cut off pieces and stack them. Use your thin feelers to see how much the gap is larger.

Or get lengths of precision ground drill rod in 1/32", 1/16" and 3/32" diameter.

Or buy 12" long feeler gauge stock in .032" thickness and stack them up. Or buy another feeler gauge set so you have enough to stack them as tall as you need.

Gerald J.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]