Tractor Talk Discussion Board |
Re: Allis chalmers wc front rims
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by wilman on July 03, 2006 at 18:27:48 from (12.215.107.140):
In Reply to: Allis chalmers wc front rims posted by Greg schilling on July 03, 2006 at 18:11:09:
The 17 inch spoke front wheels are the correct front factory rims for a 1935 WC and are highly sought after because not a lot of them survived. You can use a 16 inch front 6 bolt disc wheel (rim) but you will have to change hubs and spindles. You should be able to find the 17 inch tires from some specialty tire place I would think becuase I know there are WC"s out there with the 17 inch spindle rims on them. You might try Miller tire. Or maybe some one will know where you can get those tire at. Wil
Replies:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|