Re: Power Hookup?

Posted by john *.?-!.* cub owner on July 10, 2006 at 07:28:34 from (66.112.34.14):

In Reply to: Power Hookup? posted by Foligno on July 10, 2006 at 06:28:25:

not familar with Owatona setup, but normal connections for solenoid to start engien would be a hot lead to + side of battery, and a ground to negative side of battery. The switch would either go form + side of battery to a third lead on solenoid, or form ground to third lead of solenoid, dependign on type solenoid. Note, you need 2 switches with this set up. One to operate the starting solenoid, and a seperate one for ignition, unless you have a key swithc that performs both functions. Another possibility is a push to start button mounted on the contorl panel somewhenre.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]