Tractor Talk Discussion Board |
Re: How big a plow?
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Bill(Wis) on July 11, 2006 at 16:37:48 from (71.249.198.251):
In Reply to: How big a plow? posted by Luke S on July 11, 2006 at 07:01:07:
Discing alone will tend to pack the ground, which you say is already packed, but it will also smooth it. The best tool to break compaction is a chisel plow. That will leave a really rough surface but you can then disc it and drag it smooth. I don't know how much vegetation you have in the field now. The moldboard plow will turn that over, something a chisel won't do. What I would probably do, not having seen the field; 1- apply roundup; 2- wait about 5 days; 3- chisel deep, 2 or 3 times in different directions; 4- disc and smooth drag 5- plant something, alfalfa? Have you done any soil testing? If you're serious about growing something you should soil test now if you haven't. That way you can apply appropriate amounts of ag lime, N,P,K, etc. and incorporate with your tillage.
Replies:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|