Tractor Talk Discussion Board |
Re: Huh!
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Jimmy King on August 06, 2006 at 20:22:29 from (207.69.138.12):
In Reply to: Huh! posted by Bret4207 on August 06, 2006 at 16:15:00:
Whats strange about that Bret is that when I was growing up in the 50's and early 60's we never pined a hitch pin and always just used a 3/4 inch bolt about 10 inches long. I don't remember ever losing anything. I had left the farm and in the late 60's my BIL and I were moving hay from where I lived to his place. He was on a 430 Case and I was on a B JD we were both pulling two wagons I crossed a bridge and something didn't feel right I looked back and the front wagon tounge was on the ground. Took me a long time to figuer this out I had pulled bundle wagons across the fields and silage wagons in road gear and never lost one before. Our wagons were all home made with oak tounges his wagons were factory with steel tounges. I have lost fertilizer buggies when the pin in the hitch pin was drug out.
Replies:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|