Tractor Talk Discussion Board |
Re: Kubota B6100
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Gentel Ben on August 21, 2006 at 07:18:15 from (12.158.105.144):
In Reply to: Kubota B6100 posted by Tim on November 22, 1999 at 06:31:45:
I own a B6100 Kubota.My attachment for it are a 4' finish mower,12x16 disc, a 38" brush mower, a box blade, a PTO driven spreader,a Kubota tiller,and a boom pole. The first thing you need to do is put trencher tires on the back!! They have good traction and don't dig up the grass as bad as tractor tires do.Mine are 29.5 x 12-15.It makes a big difference. The disc is probably a little too big,but it can pull it. Everything else works great. The brush mower is small,but I build deer feed plots on my hunting lease. Anything bigger would not fit between the trees. It is hard to find attachments small enough for this little tractor, but they are out there and most of the time cheap. I tried a 4' brush cutter. It was to heavy and made it like sitting in the middle of a teeder-todder. I hope you like it and if you have ? just ask me.I'll try to help. Ben
Replies:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|