Tractor Talk Discussion Board |
Re: Plow or chisel 7 acres of hard no-till
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Thack on September 02, 2006 at 11:17:43 from (207.250.138.173):
In Reply to: Plow or chisel 7 acres of hard no-till posted by Jd 730 part-time farmer on September 02, 2006 at 07:32:50:
Surface compaction occurs from the surface down to the bottom of the tillage depth. The cause of surface compaction is the usual: the weight of people, animals, implements, etc. That spot out by the barn where you play basketball, the high school football field or a garden would be good examples of this and your plow would fix this...but it is not your problem. Plow pan (hard pan) compaction lies directly below the normal tillage depth. It develops when the depth of tillage is the same from year to year. Your chisel plow would fix this. Subsoil compaction occurs just below the depth of tillage and is the result of implements/tractors having an axle load of over 5 tons. This is hard to get rid of and will require the area to be "subsoiled or ripped". If this is your problem hire it done and then your 730 will have the power to handle "it"s" future compaction issues.
Kinda like Tractor vet was saying, an M can"t solve the problems a 806 makes.
Replies:
Home
| Forums
Today's Featured Article -
The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|