|
Tractor Talk Discussion Board |
Re: Piston Sleeves for Ford 8N 48 Model
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by BB Stacker on August 10, 1999 at 11:59:15 from (163.181.251.1):
In Reply to: Piston Sleeves for Ford 8N 48 Model posted by Raymond E. Jones on August 06, 1999 at 16:19:43:
Raymond, two types of sleeves were used in the 8n. The early ones were thin wall steel and the later were thicker and cast iron. The 48 8n was originaly steel, they can be split with a large screwdriver and collapsed. Check on the N board archives. A good manual will give you the procedure.
Follow Ups:
Post a Followup
|
