Re: three-point question?

Posted by Bob on October 04, 2006 at 22:40:29 from (69.178.229.154):

In Reply to: Re: three-point question? posted by Tom Whitehead on October 04, 2006 at 21:49:24:

"Position Control" is simply a mechanical feedback mechanism that makes the 3-point return to a pre-set depth each time you lower the implement with the control lever.

There are LOTS of home-made or "jobber" 3-points around that simply use a double-acting valve to control the depth, as judged by the operator, and folks seem to get along fine with them.
A mechanical stop can probably be rigged to stop the lift's drop each time at a predetermined point.

Replies:

• Re: three-point question? Tom Whitehead 23:19:33 10/04/06 (1)
  • Re: three-point question? Bob 00:48:05 10/05/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]