Tractor Talk Discussion Board |
Re: OT rewiring a house
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by JayWalt on October 23, 2006 at 05:39:55 from (24.223.138.48):
In Reply to: OT rewiring a house posted by msb on October 22, 2006 at 18:55:08:
My sisters house was the same way. Instead of spending weeks trying to fish wire (The house is very poor designed for fishing new wire), we opted to run all the circuits through a GFCI outlet bank at the panel. The house only had 6 "outlet" circuits, so it wasnt bad. This was alot cheaper then all new romex and the time involved. We then changed all the outlets to grounded outlets and put the supplied "no equipment ground" on each outlet. My dad is a state certified electrician and said this is fine. Grounding is done so that in the event that the hot wire touches the metal case of an appliance, the ground provides a return path to the breaker panel instead of you providing a return path to earth. The ground and neutral are connected at the panel and act as the same conductor. However, using a neutral as a ground is prohibited by NEC. This is because there must be a separate, unloaded return path (ground) in the event of a short to the case. This wuld ause a short circuit situation and blow the breaker. A GFCI does the same function to prevent electric shock. Devices that require an equipment ground (not really alot out there that does) may not function properly. My sister has never had a problem, in fact, she was saved by the gfci when a device of heres failed. This is probably not the way for most people to handle this situation, but it was perfect for my sister's case. You can also buy GFCI circuit breakers, but the $10 GFCI outlets were alot cheaper then the $70 CGFI breakers.
Replies:
Home
| Forums
Today's Featured Article -
Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|