Re: O/T '90 Jeep charging system

Posted by souNdguy on November 01, 2006 at 17:39:13 from (12.64.158.206):

In Reply to: O/T '90 Jeep charging system posted by MeAnthony on November 01, 2006 at 12:01:43:

I'm going to make some assumptions here.

1, you don't have more laod than alternator capacity.

2, battery is good

3, truck has a analog volt meter gauge that is operational when ignition is on.

What I would do is make a jumper wire of 10ga and jump from alternator charge stud to battery post. Then look at your volt meter.. if it increases when you hook up this wire, then you have an insuficience int he charge wire.. or a bad connection.

Also wouldn't hurt to know what the volt reading is at the back of the al, vs the battery.. if there is a big discrepency, then I'd deffinately look at the charging system wire harness.

Soundguy

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]