Re: What to do next?

Posted by Jrry on November 06, 2006 at 07:49:52 from (205.144.234.174):

In Reply to: What to do next? posted by Jrry on November 06, 2006 at 06:57:53:

To answer a few of the questions below. The tractor is a 12 volt negative ground. The coil uses an external resister. I did not change all these items at one time. I first tried to get spark by using the what was on the tractor, i.e. points, condenser, etc. but no luck. I then changed the coil with no luck, then adjusted the points and then changed to electronic ignition. I got the electronic ignition according to the one listed on this site for the 12 volt negative ground. I followed the directions for installation in the package using the external resister which is still in place. I checked the fire going to the resister and coil and coming out of the coil and the tester does light up properly. I have not checked the big wire coming out of the coil though. The EI installation seemed straght forward so hopefully no problem there. thanks for the replies.

Replies:

• Re: What to do next? Bob 08:00:02 11/06/06 (2)
  • Re: What to do next? Jrry 09:44:15 11/06/06 (1)
    • Re: What to do next? Bob 11:52:41 11/06/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]