Re: kink or twist in loader

Posted by 135 Fan on November 07, 2006 at 20:05:10 from (68.149.51.133):

In Reply to: Re: kink or twist in loader posted by Roy Suomi on November 07, 2006 at 19:42:45:

I agree with Roy. Take a long staight edge and check all parts of the loader boom and frame. A straight edge will show anything thats twisted from one side to the other. If you take the bucket off, it should come off easy and the pin holes should line up easy to put it back on. It could be worse, I saw a Kubota that apparently had the boom fall down by itself at top speed on the highway. It busted the whole transmission case and needed a new one. Big job. Dave

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]