Re: Little 3 point mounted backoe

Posted by David Snipes on November 29, 2006 at 10:44:56 from (198.239.217.184):

In Reply to: Little 3 point mounted backoe posted by Bart CA on November 28, 2006 at 18:23:34:

I have have a Bradco backhoe made by American Trencher. It is about 20 years old & a sub-frame mount, 7 foot depth. Overall it has been very usefull. It has chain link connected to a hydraulic cylinder for the swing motion. I have broken 3 chains over the years and I find it to be a bit sloppy. I bent a dipper arm cylinder several years ago and I just bent a bucket cylinder. I don't know if the bending is a brand problem or an operator problem. It does happen, I suppose. I dont recommend the chain swing.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]