Tractor Talk Discussion Board |
Re: Standby Generator Thoughts (warning, kinda lon
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by RM in Va. on December 06, 2006 at 00:15:17 from (209.145.80.137):
In Reply to: Standby Generator Thoughts (warning, kinda long) posted by Blue3992 (N. Illinois) on December 05, 2006 at 21:45:06:
I went through the same decision making process about 5 years ago. Wound up buying a PTO generator and making a 3 pt. frame for it and used a PTO shaft that I already had. Cost back then was under $1,200 for a 13,000 watt/15,000 surge/50amp. Things I looked at were upkeep on another engine that would maybe sit unused for 99.999% of the time and being portable. I have several wells for cattle so I need to be able to move the generator to fill waterers. I have two tractors and keep diesel fuel in a storage tank. So that's why I went with the PTO type. Before I bought the PTO generator we'd be without power for up to 7 days in a hurricane or noreaster snow or ice storm. Since I bought the generator the longest I've run it was 9 hours. So if you want to stop having long term power outages just buy a generator. LOL The PTO generator has come in handy on the farm. Can have power anywhere I need it now. Use it for small projects and repair work. It's easy to hook to the tractor and I think if I had to do it again I'd still buy the PTO type. Can also help out neighbors. Have plenty of eldery neighbors close to me and they need looking after when we have storms come through. That's what has worked out pretty good for me.
Replies:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|