G John Deere

Posted by DALE Spackman on December 22, 2006 at 08:12:34 from (67.134.165.136):

Restoring a G John deere. The head is broken and the block has had water in the cylinders. To remove the block I had to disconnect the rods and remove the block as an assembley. The rods didn't have any bearings in them just alot of shims to adjust the clearance. This is a 1947 according to the serial No. This is the first time I've worked on an engine without rod bearings. Can any share some history on this engine and what is the best way to go with these rods.

Replies:

• Re: G John Deere 430WLPG 14:30:36 12/22/06 (0)
• Re: G John Deere Bob 08:28:09 12/22/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]