Re: 350 chevy and a 350 GMC, is there any differen

Posted by morningwood on December 27, 2006 at 08:16:06 from (66.82.9.62):

In Reply to: Re: 350 chevy and a 350 GMC, is there any differen posted by O on December 26, 2006 at 18:23:33:

The frames on the Chevy and GMC 3/4 and one tons are the same.

Both trucks are built in the same factory and when a chevy is ordered it goes to a different line to have a different front clip / paint / decals put on.

If you want more info about 3/4 and one ton trucks take a look at dieselplace.com. The guys over there can answer any question you have. There are a few guys who post from there who work at the flint plant were the trucks are assembled. Yes they are still made in the U.S. and not in mexico as some people will tell you.

Scott

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]