Tractor Talk Discussion Board |
Re: 4320 vs 4020
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Gerald J. on January 03, 2007 at 19:31:23 from (67.0.97.159):
In Reply to: Re: 4320 vs 4020 posted by Reaver on January 03, 2007 at 15:48:29:
I don't know. My notes don't say 4320 or 4620. A good JD shop man should know. Or look for that Service Information number from my web page and see if it covers your tractor. I also referenced some service bulletins of the era on my web page. The fundamental problem is that the oil cooler and a reservoir up front hold more than a couple gallons of oil. If the check valve in the early 4020 in the transmission or near the reservoir of the late 4020 leaks the front pump runs out of oil quickly. That's the function of making the elbow into a check valve to replace one that's hard to get to in the depths of the tranmission. But if there's a high pressure leak bypassing oil from the output of the main pump it will use up that reserve fast too. I know putting the check valve in the elbow on my '68 4020 did fix the loss of hydraulic with the clutch pushed in. More than once I've let it set for months, pushed in the clutch, started it, and raised the loader before letting the clutch out. Working in a basement hole, I'd seat the loader bucket in the dirt on th side, and push in the clutch shift gears while I was turning the steering and rocking the bucket to break the bite loose and beginning to lift before letting the clutch out in reverse to back away. Busier than a one armed paper hanger, but the hydraulics kept up. Gerald J.
Replies:
Home
| Forums
Today's Featured Article -
Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|