Tractor Talk Discussion Board |
Re: 806, 966, 4020 comparisons
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by jdemaris on January 05, 2007 at 10:40:37 from (69.67.230.38):
In Reply to: 806, 966, 4020 comparisons posted by Tom3 on January 05, 2007 at 08:27:05:
When I was working for a Deere dealer, we had an IH dealer nearby. They were our biggest competitor. At that time 4020s were often a farm's main tractor - unless they were IH people. I'd heard the 856 most often - being compared to Deere's 4020. At the local county fair - they both were favorities for home-grown, off the farm pullers. Mid-70s the IH place went out of business. My boss hired their top mechanic and also bought some used IH tractor inventory. It was kind of funny at first - the new IH mechanic kind of had a attitude about Deere stuff - just as we did with anything that wasn't Deere green or yellow. Ended up, he was one of best mechanics I've ever met - and he also came to repect - actually like the Deeres. Not more than IH, but close enough. He said one day - somewhat reluctantly that the 4020 was at least an equal to the 856. High praise coming from him. My only complaint with working on the IHs was the small learning curve - after years of Deere experience. We bought and sold quite a few used IHs, but most got worked on by our resident IH man. I will say this though. I worked on many 4020s we rebuilt and then ran on the dyno for a full day - light load, med. load, full load, etc. Also did the same with 856s. The 856s under the same tests/dyno runs used less fuel than the 4020s. Not a tremendous amount, certainly enough to notice. Now, out in the field? I don't know.
Replies:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|