Tractor Talk Discussion Board |
Re: Allis tractor ?
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by CentOH Hay on January 13, 2007 at 09:22:06 from (65.186.87.186):
In Reply to: Allis tractor ? posted by Dave from MN on January 13, 2007 at 07:50:20:
The power director transmission operates similarly to a TA on an IH, only with a couple more twists. Thinking of an eloquent way to describe its operation isn't easy so bear with me. Like a TA the power director (PD) doubles the number of speeds available, allowing you to move from low to high on the go (nice for headlands, tough spots, etc). That being said, don't dilly dally going from low to high, if you have a load you will lose momentum, and its just like slipping the clutch....bad. Unlike most IH tractors with TA's a PD tractor does not have a true Indepenant PTO, its live, but not independant. With the PTO engaged the foot clutch will stop the PTO, so if you are using a baler for example where live PTO is important, movement needs to be controlled with the PD clutch (hand clutch). For some people this is a real problem for others it is not, it just takes some getting used to. Like a TA, the durability of the whole system is entirely up to the operator. One thing to consider, the main part of the transmission on these tractors is what we call unsyncronized constant mesh, whereas on an IH its just unsyncronized. This means you can't go trying to change gears while still rolling or untill the gears have completely stopped. This is where the stories of jumping out of gear on the 190XT's comes in. I believe on the 7000 series they installed a transmission brake to get things stopped quicker, in any case, its not a crash box tranny so be gentle. As for the cabs, what little experience I have was in a tractor where the AC didn't work so I can't help you there. I can say that rear visibility is pretty good (can see the drawbar without craning your neck). However, I hope you aren't much over 6 foot tall or you will be hitting your head a lot, as the sides of the cab come in as you get to the top. I believe the 7020 had the 301 diesel (someone correct me if Im wrong). This is a great engine, runs smooth as a top, doesn't use much fuel at all, etc. The one drawback is it can be a dog to start in cold weather. Clear as mud? I appologize if that doesn't read very clearly. Alex Disclaimer: Most of my experience on Allis' comes via 190XT's and 200's so there will be some differences in operation but generally the terms should still apply.
Replies:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|