Re: 1995 Dodge Ram 4x4 front axle engagement for f

Posted by marlowe on January 15, 2007 at 21:08:30 from (12.213.112.37):

In Reply to: Re: 1995 Dodge Ram 4x4 front axle engagement for f posted by Reynolds on January 15, 2007 at 20:34:19:

the splines get wore and they will not stay in the lock position the coupler is a little softer then the axle but if you have a u joint out then the needle bearing in the outer hub is more the likely shot also and the rubber compresion seal is shot also the hole thing comes in a rebuild kit from auto zone same as older chevy and gmc trucks. but i'll still bet it's the couple and axle shaft. only trucks i ever owend are dodge. you have dana front ends in them DON'T go to dodge for parts go the auto zone or napa

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]