Tractor Talk Discussion Board |
Re: senior project
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by RayP(MI) on January 18, 2007 at 18:16:21 from (207.241.138.131):
In Reply to: Re: senior project posted by RJW on January 18, 2007 at 17:36:31:
My son restored a 1949 JD B, ( tore down to engine and transmission, refurbished and repainted, replaced exhaust and ignition & generator, reupholstered, and generally fixed up until it looked almost new, and run like new.) ((Some have a more strict definition of restored!)) That was his senior project. When teacher came out to review, she asked if he had spent the required 15 hours -- his response, "Would 500 hours do?" So plan on spending lots of time. He also had over $500 in the project. You should be able to find several restorers in your area who would be glad to give you tips, etc. Just have to look a little bit. Check local parades, festivals, tractor shows for nice looking restored tractors, and talk to the owners. They will probably know restorers in your area. You are wise in looking into this as early as you are, because a project of this magnitude will take a large amount of time. If you can, get a commitment from your school to approve the project before you get started. Some school senior project committees are pretty narrow about what they approve! Unfortunately, they wouldn"t approve son"s project until late in his junior year, (he"d been secretly working on it for some time by then.) Take lots of before, during and after photos. You"ll want the documentation, both for the school project, but also for reassembly, painting and decal placement. Son"s school also required a major research paper, visits to other tractor restorers, and presentation of his project (with a speech) to a panel of adult tractor restorers. And a grading by those on panel. Good luck on your project. You"re in for a lot of learning! Be sure and share your experiences and some photos with us on this board. We love pictures.
Replies:
Home
| Forums
Today's Featured Article -
Hydraulic Basics - Part 2 - by Curtis Von Fange. In the last entry to this series we gave a brief overview of hydraulic system theory, its basic components and how it works. Now lets take a look at some general maintenance tips that will keep our system operating to its fullest potential. The two biggest enemies to a hydraulic system are dirt and water. Dirt can score the insides of cylinders, spool valves and pumps. Wate
... [Read Article]
Latest Ad:
1945 Farmall wide body gas with pto and front plow. Runs good but needs new points.
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|