|
Tractor Talk Discussion Board |
Re: Be Honest Now
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by old art on January 19, 2007 at 10:37:27 from (68.77.136.214):
In Reply to: Re: Be Honest Now posted by Steven@AZ on January 19, 2007 at 02:40:59:
almost quitting time finshing a valve job on a wills wagon flat heah we left a socket on top of a piston went to start got a thump the boss heard it and told us what we did and to get done before you go home. dosent tahe long to take apart the second time and back togather again when you chewed out good 10 minutes out the door. one time had a cutomer came for a grease and oil change onhis car said it out side the key are in it went got itin did the job ran it out. then found out we did the wrong car did the right one right away a different customer had a free job.
Replies:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
